Hackintosh UEFI BIOS Settings

Proper UEFI BIOS Settings are required when Installing a Hackintosh with Clover Bootloader or OpenCore Bootloader.

A simple mistake in UEFI BIOS may prevent your Hackintosh from Booting. UEFI Configuration error may cause macOS to hang on boot process or may even cause kernel panics.

Here we have listed basic UEFI BIOS Settings that is required to boot a #Hackintosh in a UEFI MotherBoard.

1 Disable CSM

Disable CSM

The Compatibility Support Module (CSM) is a component of the UEFI firmware that provides legacy BIOS compatibility by emulating a BIOS environment, allowing legacy operating systems and some option ROMs that do not support UEFI to still be used.

Clover Bootloader and OpenCore Bootloader supports UEFI Booting. Disabling CSM makes BIOS to easily discover Bootloader.

2 Disable Secure Boot

Disable Secure Boot

Secure Boot prevents booting an unsigned Bootloader from any internal disk or USB drive. Secure boot is not supported by Clover or OpenCore. Secure Boot must be disabled in UEFI BIOS to boot from a Hackintosh.

To Disable Secure Boot Just “Clear Secure Boot Keys” or delete PK Keys.

Delete Secure Boot Keys

3 Set OS Type to Other OS

Set OS Type to Other OS

Set OS Type as Other OS to get the optimized functions when booting from Third party Operating Systems that does not support Microsoft Signed Secure Boot.

4 Set SATA as AHCI

Set SATA as AHCI

Advanced Host Controller Interface (AHCI) mode enables the use of advanced features on SATA drives, such as hot swapping and Native Command Queuing (NCQ). AHCI also allows a hard drive to operate at higher speeds than in Legacy IDE mode.

5 Disable CFG Lock

Disable CFG Lock

CFG Lock prevents macOS from writing to a certain region in your BIOS. macOS does this for power management and other reasons, and if it can’t access it, it will not boot.

6 Disable Intel Virtualization Technology / VT-X

Disable Intel Virtualization Technology / VT-X

Several Intel CPUs come with the Intel Virtualization Technology. Formerly known as Vanderpool, this technology enables a CPU to act as if you have several independent computers, in order to enable several operating systems to run at the same time on the same machine.

Intel Virtualization Technology (VT) is also know as VT-x extension that allows direct access to CPU under a virtual machine which makes virtualization software like VMWare/Parallel Desktop perform better.

But for many #Hackintosh users VT-X cause no problem but if you are a fresher trying to Install & Configure your Hackintosh Disable Intel Virtualization Technology and Install . You can Enable Virtualization Technology after the Installation when you need it.

7 Disable VT-D

Disable VT-D

VT-d specifically is an IOMMU specification. An extension that allows you to access physical hardware under a virtual machine (for example a system running Linux can run Windows in a virtual machine. Without VT-d, the video card is emulated and will be slow for games. With VT-d, the video card can go into passthrough mode and be accessible as real hardware under Windows (you can install the nvidia driver) and video card performs like if you run native Windows.

But for many #Hackintosh users VT-D cause no problem but if you are a fresher trying to Install & Configure your Hackintosh Disable VT-D and Install. You can enable VT-D after the Installation when you need it.

8 Enable XHCI Hand-off

Enable XHCI Hand-off

9 Disable Legacy USB Support

Disable Legacy USB Support

10 Disable USB Keyboard and Mouse Simulator

Disable USB Keyboard and Mouse Simulator
You might also like

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. By continue browsing you're accepting the Terms & Conditions of This website. Accept Read More