This is the official guide to Install High Sierra Zone on PC. macOS is built for Apple computers, Installing macOS on PC is called Hackintosh. Here you can learn how to Hackintosh High Sierra. There are few ways of installing a Hackintosh, but Hackintosh High Sierra Zone is the most convenient way to set up your Hackintosh.
If you are searching for ‘How to Install Hackintosh High Sierra on PC,’ ‘How to Install macOS High Sierra on PC,’ or ‘Hackintosh High Sierra Installation Guide’ well you are at the right place, This is the official guide to Install Hackintosh High Sierra Zone on PC.
macOS is built for Apple computers, Installing macOS on PC is called Hackintosh. Here you can learn how to Hackintosh High Sierra. (We have also previously covered How to Install Hackintosh Sierra on PC.) Most of the troubleshooting information is included in this article, so read this article entirely once before beginning any procedures.
- You do not need a real Mac: All other methods of Installing Sierra require extensive knowledge + a Real mac because those guides are based on macs, but High Sierra Zone never require a mac, you can setup a Hackintosh without the need of a real mac. You can set up everything from a Windows / Linux computer.
- You can install it on a hard drive that already has Windows installed: By default, the macOS installer will not work with hard drives that were originally formatted in Windows. Therefore, if your computer’s hard drive already has Windows installed on it, you will not be able to install macOS on there, but High Sierra Zone automatically patches this so you can bypass this limitation. The patch is called MBR Patch.
- High Sierra Zone Support More Hardware (Including AMD): High Sierra Zone Supports a far range of Hardware, most audio, wireless and ethernet drivers will be installed automatically.
- Post Installation is Easier: Just like windows, you have to install drivers to make macOS perfect, which is pretty hard for beginners. However, High Sierra Zone automatically do this for you by installing most drivers automatically, and High Sierra Zone also installs the Bootloader for you, but you may have to install additional drivers manually in case High Sierra Zone could not install the driver for you.
- Supports AMD Processors
- Auto-Install Ethernet Drivers
- Auto-Install WiFi Drivers
- macOS High Sierra USB Fixes
- Can be installed with Unsupported Graphics Cards
- A CPU (AMD / INTEL) with SSE4.1 Support: Without SSE4.1 Instruction set High Sierra will not run
- A Computer / Laptop purchased after the year 2011: High Sierra Zone Supports a vast range of Hardware, but anyhow Apple dropped support for older Hardware so there is a possibility of Kernel Panics, but it does not mean that you cannot run but you have to try yourself.
- An existing computer with Windows, Mac or Linux Operating System: This is the computer where you will download and set up the High Sierra Zone. The computer can run either Windows or macOS; both operating systems will work.
- A Hackintosh compatible computer with an empty hard drive: This is the computer where you will install macOS High Sierra. It can be the same computer as the one mentioned in the previous point. If your computer already has macOS installed, High Sierra Zone will update macOS normally, without deleting any of your apps or files. macOS High Sierra needs its own hard drive partition, a minimum of 10 GB of space is required, but at least 50 GB of space is recommended. It is preferred that you use an empty hard drive for this, but if your computer already has Windows installed on your hard drive, be sure to create an appropriate hard disk partition for macOS High Sierra by following Create a hard drive partition for macOS with Windows
- Hackintosh High Sierra Zone (Free): High Sierra Zone is a bootable distro of macOS High Sierra which has been modified to work with PCs You will need to use a BitTorrent client to download the disk image file containing “Hackintosh High Sierra Zone.dmg,” (Transmission is recommended)
- Restore High Sierra.pkg (Free): If you are using a Mac to set up High Sierra Zone, you need to Hackintosh Zone’s special “Restore High Sierra” app to write the disk image file onto your USB drive.
- An empty USB drive (6 GB or larger): In this guide, you will write Hackintosh High Sierra Zone onto a USB drive, and boot your computer from that drive to install macOS High Sierra. The USB drive must be at least 6 GB in size. Since you will need to erase all of the files on the USB drive, make sure to back up its contents first. You can reuse this USB drive for usual works after you finish installing High Sierra.
- TransMac: ($48, 15-day free trial): If you are using a Windows computer to set up High Sierra Zone, you need to use TransMac to write the disk image file onto your USB drive. You can download the free trial.
To Install macOS you have to port the dmg image into the USB, this is like burning an ISO image but easier than it. Unlike DVD You can erase your USB later and use it for other purposes.
Follow this step if you are setting up Hackintosh High Sierra Zone on Windows (How to Create your High Sierra Zone USB drive from Mac).
Plug your USB drive into your computer, and open TransMac. Find your USB drive in the left-hand column of the TransMac window. Right-click on the USB drive, and click “Format Disk for Mac.” This will delete all of the files on your drive and prepare it for macOS.
Once your USB drive is done formatting, right-click it again and click “Restore with Disk Image.” A file selection window will pop up; choose your High Sierra Zone disk image file (it will probably be called “Hackintosh Zone High Sierra Installer.dmg”), and proceed. Now, TransMac will write High Sierra Zone onto your USB drive.
This will probably take 20-40 minutes, though it may take longer, depending on the speed of your USB drive. Once TransMac finishes, your USB drive will contain a fully bootable version of the Hackintosh High Sierra installer.
Follow this step if you are setting up High Sierra Zone on a Mac or existing Hackintosh (How to Create your High Sierra Zone USB drive from Windows). Plug your USB drive into macOS, and open Disk Utility (located in Applications -> Utilities in your primary hard drive).
Select your USB drive in the sidebar of Disk Utility and erase the drive, with the “Format” set to “Mac OS Extended (Journaled)” and “Scheme” set to “GUID Partition Map”. You can rename the drive any way you want (Mine is named “Hackintosh” in the image below).
Next, make sure that your Hackintosh High Sierra Zone disk image file is in the same folder as “Restore High Sierra.pkg”. If “Restore High Sierra.pkg” is still in a ZIP file, double-click on that file to unzip it.
Double click on “Restore High Sierra.pkg” to start the app. By default, the app will be aimed at your computer’s main hard drive (mine is named “Mac” in the image below). You do not want this– instead, click through the installer until you reach the page with the “Change Install Location” button. Select the drive that you format (It is named “Hackintosh” in the example below)
Press the enter / return key. The app will ask for your system password. After you enter your password, it will begin writing the Hackintosh High Sierra Zone disk image onto the USB drive.
This will probably take 20-40 minutes, though it may take longer, depending on the speed of your USB drive. Once it finishes, your USB drive will contain a fully bootable version of the macOS High Sierra.
NOTE: “Restore High Sierra.pkg” is very glitchy. If you cannot find the “Change Install Location” button on the first time that you run the package, restart your computer and re-run the package.
You have to install dmg2img, use apt-get or yum to install dmg2img
sudo apt-get install dmg2img
sudo yum install dmg2img
Uncompress Sierra DMG with dmg2img, then restore the uncompressed image to USB, Change the variables below as you need (Warning: The following is just an example do not copy and paste)
dmg2img -v -i /path/to/'Hackintosh Zone High Sierra Installer.dmg' -o /path/to/Hackintosh-High-Sierra-Zone-Uncompressed.dmg dd if=/path/to/Hackintosh-High-Sierra-Zone-Uncompressed.dmg of=/dev/sdb bs=1M
Boot into Windows Vista or Windows 7, and type “partition” into your Start Menu search bar. Choose “Create and Format hard drive partitions” to open the Disk Management utility in Windows.
You will see a bar displaying the partitions of your hard drive. Right-click on the emptiest partition in the hard drive that you want to install macOS on, and click “Shrink.” This will allow you to shrink the size of that partition so that you have extra space on your hard drive to create a new partition for macOS.
Once the shrinking process is complete, you should now have some unallocated on your hard drive. Right-click the Unallocated section of your hard drive’s bar, and choose “New Simple Volume.”
A helper will pop up. From here, format the Unallocated space as an NTFS volume (or an exFAT volume; it should not matter since you will be wiping this partition in macOS Installer anyways).
- Disconnect USB Devices: Unplug all USB-connected devices from your computer before you begin the setup (except your keyboard and mouse). A faulty external USB hard drive can cause your Hackintosh bootloader to give you EBIOS errors on startup.
- Unplug any Extra Hard disks: Open up your computer and unplug any extra internal hard drives that your computer has, besides the hard drive that you are installing macOS on. (Just disconnect the hard drive SATA & Power cables from your motherboard.)
- Backup Your Data: You should always take care of your data, High Sierra Zone will not damage your data but always be safe.
Essentially, the BIOS (or UEFI) is the settings page for your computer’s motherboard. From here, you can fiddle with how your computer hardware works it is often necessary to change a few basic settings in the BIOS or UEFI to get macOS up and running.
The BIOS standard is usually used by motherboards from before 2012, while the UEFI standard is used by motherboards made after that.
To access BIOS / UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
- Load Optimized Defaults
- If your CPU supports VT-d, disable it
- If your system has CFG-Lock, disable it
- If your system has Secure Boot Mode, disable it
- Set OS Type to Other OS
- If your system has IO SerialPort, disable it
- Set XHCI Handoff to Enabled
- If you have a 6 (Six) series or x58 system with AWARD BIOS, disable USB 3.0
Save and exit.
For more information view Hackintosh Bios Settings article
Restart your Hackintosh, and plug in your Hackintosh High Sierra Zone USB drive. Press the key to change boot device (F8 / F1 / F10); the key varies with motherboard If things go well, your computer will boot from the USB drive instead of booting from your normal hard disk.
You will then be able to view the High Sierra Zone boot menu.
This is the Clover Boot-loader of Hackintosh High Sierra Zone (UEFI / EFI), Hackintosh High Sierra Zone also can be boot from Chameleon by pressing number 2 in legacy mode (How to boot Hackintosh High Sierra Zone Installer with Chameleon).
If you do not manage to reach the Hackintosh High Sierra Zone menu, check your motherboard’s BIOS settings to make sure that the changes you made in Make PC Ready for Hackintosh Installation and Set up your motherboard’s BIOS were applied correctly.
If they were, but you still cannot boot from the High Sierra Zone USB drive, try changing the USB Port to another switch between (USB 3.0 & USB 2.0) If everything fails, try using a different USB drive for Hackintosh High Sierra Zone.
At the “High Sierra Zone” Menu select “Hackintosh Zone High Sierra Installer” from the menu (Sometimes the name will not be visible) and press the key enter (return key).
The installer screen will take several minutes to load. Usually, you will end up in Language Chooser Menu like the following picture.
In the worst case scenarios, instead of loading the Hackintosh High Sierra installer, you may end up with a dark gray screen that tells you to restart your computer (a kernel panic), or you may end up with a small crossed-out sign (a loading error).
If you get a kernel panic / loading error (or if the Hackintosh installer simply won’t start within 10 minutes), you will need to enter some boot flags.
To enter boot flags, manually restart your computer by pressing your computer’s power button. Then, once you have booted back into the High Sierra Zone menu, try typing any necessary boot flags before pressing the enter / return key.
Check out our list of common boot flags and our guide to fixing boot problems with the verbose mode for reference.